Flares And Fires

Nothing lasts forever, and that's especially true of anything on a boat. When you inspect your safety equipment this spring, pay close attention to those things that have a limited lifespan. Flares, in particular, are only good for 42 months after manufacture (not purchase date) unless otherwise specified by manufacturer and authorized by law.

How old are your fire extinguishers? Many disposable (nonrechargeable) fire extinguishers typically used on boats have a 12-year expiration from the date of manufacture, but don't hesitate to replace them before that if they're damaged. The manufacture date is stamped on them, sometimes on the bottom. Rechargeable fire extinguishers have far more stringent maintenance requirements. Follow manufacturer recommendations and applicable laws as to inspection, maintenance, and care of your particular fire extinguishers. The seriousness of boat fires requires extreme diligence.

Stainless Hose Clamp?

You've read it before — hose clamps that say they are "all stainless" aren't always being 100 percent honest. Sure, the clamp itself may be stainless, but often the screw that tightens it isn't. That deception means that the most important part of the clamp may fail within months — or even weeks if it's exposed to saltwater.

A failed hose clamp may be as inconvenient as a leak in the potable water system or as dangerous as an exhaust leak that pumps deadly carbon monoxide into the boat. Because your boat likely has dozens, if not hundreds, of hose clamps, you need to inspect them at least every spring and replace any that show signs of corrosion.

Besides rust on substandard screws, check the bottom of vertically mounted hose clamps where water may collect from a slow leak. Standing saltwater will corrode even stainless steel, so use a flashlight (and mirror, if needed) to inspect the entire clamp for rust.

Replace damaged clamps with name-brand clamps, such as Tridon or AWAB, that are made from 316-grade stainless. Check with a magnet if you're not sure; proper stainless is nonmagnetic. AWAB clamps use smooth nonperforated bands, which prevent the inevitable corrosion in slotted-type clamps. The rounded solid bands also prevent your clamps from acting like a cheese slicer on your hoses.

Want to go to the next level? Try titanium clamps. They're more expensive but are nearly immune to corrosion.

Father's Day is a celebration honoring fathers and celebrating fatherhood, paternal bonds, and the influence of fathers in society. In Catholic Europe, it has been celebrated on March 19 (St. Joseph's Day) since the Middle Ages. This celebration was brought by the Spanish and Portuguese to Latin America, where March 19 is often still used for it, though many countries in Europe and the Americas have adopted the U.S. date, which is the third Sunday of June (falling on June 17 in 2018).

The nation’s first Father’s Day was celebrated on June 19, 1910, in the state of Washington. However, it was not until 1972–58 years after President Woodrow Wilson made Mother’s Day official–that the day honoring fathers became a nationwide holiday in the United States. Father’s Day 2018 occurs on Sunday, June 17.

Estimating Distance Off

Here's a great article by Dick Everitt to help you while at sea.

Got a tape measure and a piece of string? You can use them to find out how far away you are from, say, a lighthouse.

Distance off by vertical sextant angle is an old navigation technique used for keeping a safe distance from an object of known height, such as a lighthouse, the height of which is shown on a chart. With modern GPS, there's no longer a need to know how to calculate this, but it's a fun trick to show the kids, and it's a useful backup if you're ever forced to use basic navigation techniques. But as many of us don't carry a sextant, or a set of tables, we can copy what the ancients had been doing for centuries before the sextant was invented. They simply exploited their knowledge that the ratio of 60:1 is equal to an angle of 1 degree. To find this distance, simply measure the angle of the center of the light above sea level and look up the "distance off" in a set of tables, such as those found in a nautical almanac, or use a simple calculation (below). The center of the light itself, not the height of the top of the tower, is used because that's the height marked on the chart. Usually we can forget any tidal height allowance, as less tide will put us farther off in safer water.

In its simplest form, you'll use something that measures 60 units from your eye attached to a vertical ruler marked in the same units. (Using a metric rule to do this exercise makes your math calculation simpler because you can work in whole numbers instead of fractions.)

Hold a piece of string 60 cm (about 2 feet) in front of your eye. (I find a loop of string of the correct length around my neck more comfortable than holding a knot in my teeth.) Sight across the ruler and measure the height of the center of the light above sea level, in millimeters.

Then use the formula below.

It's a rough-and-ready technique, but one day it might save you being set in too close to a nasty reef or rocks. 

Dangerous Gases

If you are on a boat, you are exposed to potential danger...

Carbon monoxide enters the bloodstream though the lungs by breathing in this dangerous gas. Exposure in a well ventilated environment is generally not a problem. Brief exposure in a more confined environment can cause sickness and prolonged exposure to higher concentrations can kill you. Since symptoms of carbon monoxide mimic seasickness or alcohol intoxication it is sometimes overlooked as nothing serious and those affected never receive the medical attention they need.

Tip: Maintain fresh air circulation throughout the boat at all times and maintain your vessel to assure peak engine performance. An improperly tuned engine is more likely to produce elevated levels of CO.

To avoid CO you should know the areas of where CO can accumulate such as inadequately ventilated canvas enclosures and engine compartments. If you are tied to a dock be certain exhaust ports aren’t blocked which can force exhaust back into the boat and if you are rafted to another boat be certain exhaust from one boat doesn’t enter the other.

Beware of Carbon Monoxide

• Make sure you know where all exhaust outlets are and they are not blocked
• Confirm that water flows from the exhaust outlet when motors or generators are running
• Educate all passengers about the symptoms of CO poisoning and where CO may accumulate
• Test the operation of each CO detector for proper functioning by pressing the test button
• Open hatches or canvas enclosures if CO accumulation is suspected
• When rafted to another boat be certain that exhaust flows freely into open air
• Avoid swim platforms or swimming around or near a boat when the engine is running
• Periodically examine the exhaust fixtures on your boat to be certain of proper performance
• Always maintain your boat to peak performance to reduce the risk of CO production

BASED ON AN ARTICLE FROM The Annapolis Book of Seamanship

Reading Clouds

Learning what clouds can tell us is a useful skill that will help decide if it's safe to head out for a grand day on the water or weather a storm in port.

Weather forecasts are very important, and so is a barometer, but you can also get a reliable gauge on your local weather if you think of the sky as something like the face of an emotional person whose moods are shown right on his or her face.

Reliable indicators are the changing shape and color of the clouds, which are created by the same natural phenomena that cause the weather itself: temperature and humidity. Here are some hints for predicting weather by reading clouds.

Isolated, wispy, or very high clouds are an indication of fair weather.

Crowded, dense, dark, and towering clouds indicate changing or worsening weather.

The sharper the edge of a thundercloud and the darker its color, the more violence it may contain. Don't go below or near it.

If cloud color, shape, and size change, so will the weather.

As puffy cumulus clouds darken, enlarge, and become dark cumulonimbus clouds, expect squalls within two hours.

Cirrus

The highest and least-substantial clouds. Composed of ice crystals, cirrus clouds lie at altitudes of about 45,000 feet. Wispy and lying at oblique angles, these clouds may herald the approach of a warm front.

Cirrostratus

Wispy clouds lying in sheets may form a ceiling slightly lower than cirrus clouds as a warm front nears and layers of cold air mix with upper warm air. May drape the entire sky in a gray haze and cause a halo around the sun or moon — an indication of a nearing storm.

Cirrocumulus

Have barely-defined puffy balls and, like cirrostratus, lie at altitudes of 16,500 to 40,000 feet, usually in large clumps. From below, these clouds may look like fish scales. The saying "mackerel sky mackerel sky, not long wet, not long dry" describes them and the changeable weather that follows.

Altostratus

Sheets of cloud between 6,000 and 23,000 feet. Thicker, darker and more claustrophobic than the higher cirrostratus clouds, they promise rain soon.

Altocumulus

These have grayish-white rolls that look like cirrocumulus but are darker and sometimes appear in layers. If the wind is steady between northeast and south, these clouds promise rain soon.

Stratocumulus

Large, dark, puffy balls occurring in compressed layers and foretell bad weather.

Cumulus

Puffy white cotton balls at about 6,000 feet promise fair weather. They may, however, darken and be transformed into stratocumulus or cumulonimbus clouds, which can signal bad weather. Seen over land during the day indicates thermals and promises good sea breezes.

Cumulonimbus

Dark, tightly-packed balls that may churn and tower as thunderheads at about 6,000 feet. If broader above than below, it's called an anvil head. This shape is due to violent updrafts through a wide range of temperatures. As the updraft hits, cold air is condensed as a cloud. Winds are strong around these threatening clouds.

Nimbostratus

Heavy, rain-laden, low-lying, dark gray blankets that come with warm fronts and wet nor'easters. Their soggy bases may be just above the earth's surface and be indistinguishable from heavy fog.

Stratus

These clouds combine in a dense gray overcast that promises light to heavy rain. 

Getting Your Boat In Gear

 I watched all afternoon this weekend, as boater after boater, struggled to navigate a crowded marina restaurant, Some simple gear control could have eased the burden. So here's an old article by Chris Edmonston on working the controls.

A quick review of shifting gears and smoothly working the controls and throttle.

Shifting gears and throttle control are two skills that, in conjunction with steering-wheel control, will dictate how well you handle your boat. If you drive a car, you're used to working the gears and using a gas pedal, so it's tempting to ask, how different can it really be? Well, if you've ever been to a busy dock area, especially on a windy day, you already know the answer. There are a variety of shift and throttle controls on boats; some have separate controls, some combine them. Here we'll use a control that combines both functions into a single lever.

Shifting gears is all about smoothly and decisively working the controls to avoid lurching or picking up too much speed. Sudden or excessive throttle adjustments can lead to loss of control and cause your boat to strike the dock or another boat, so your goal is to shift into gear without exceeding idle rpm. Remember, "slow is pro," and everything you need to do to properly control your boat can be done at idle speed. Shifting from neutral should be done decisively, but without exceeding idle throttle. If you shift too slowly, you'll probably hear the gears grind. If you shift too far and begin to throttle up too quickly, you'll make the boat lunge and give your passengers an unwelcome surprise (or worse, an unexpected swim).

If you're moving from forward to reverse (or reverse to forward), always allow for a pause in neutral, long enough to say "one-one-thousand," before shifting to the next gear. Shifting too quickly can cause the engine to stall or damage the transmission.

Practice makes perfect and one simple first step you can rehearse is to find the wheel and throttle by hand, without looking. This will help build muscle memory for the ergonomics of your boat. You should also pay close attention to the sound of the transmission as you shift gears, and the change in sound of the engine as you raise or lower the throttle. Watch how your boat responds to your shift and throttle movements, and feel where the throttle changes from forward to neutral to reverse.

In close quarters, staying in gear too long or using too much throttle results in more boat speed than necessary, which forces the driver to take corrective action, and can easily turn into a series of over-corrections. By using short applications of throttle, you should be able to maintain better control of your boat's motion, and give yourself time to maneuver. Short shifts buy you the time to decide what you need to do next.

Practice Low Speed Control

Engage forward gear at idle speed for one second only, then return to neutral to assess your situation.
Engage reverse gear at idle speed for two to three seconds only, then return to neutral to assess your situation. (Boats aren't as efficient in reverse as they are in forward; that's why you can be in gear for a slightly longer time.)
When in neutral, pause several seconds so that you can assess your situation before shifting into gear.
When in gear, do not raise the throttle; stay at idle rpm

SUMMER BOATING BASICS

Okay, so now that Memorial Day, the unofficial start of Summer is here, and the holiday weekend is in full swing, the waters tend to get busy so let’s remember some basics of having a safe summer boating season.

Below are some quick tips on boating responsibly in the great outdoors. 

TRAVEL RESPONSIBLY

Travel responsibly on designated waterways and launch your watercraft in designated areas.

• Travel only in areas open to your type of boat.
• Carry a Coast Guard approved life vest (PFD) for each person on board.
• Always operate your boat at a safe speed.
• Always have a designated lookout to keep an eye out for other boaters, objects and swimmers.
• Never jump a wake. If crossing a wake, cross at low speeds and keep a close lookout for skiers and towables.
• Comply with all signs and respect barriers. This includes speed limits, no-wake zones and underwater obstructions, etc.
• Make every effort to always go boating with a partner.
• Make certain your trailer is in proper working order and that your lights work and your boat is secure on the trailer before you travel to your destination.
• When trailering your boat, balance your load including items stowed inside your boat.
• Don’t mix boating with alcohol or drugs.