Blog 2019

A Low-Tech Necessity

Compasses, used on boats for centuries, work because a permanently magnetized needle always points to north, irrespective of the position of the boat. Many boaters think that, in these days of modern electronic-charting aids, compasses are no longer needed. Nothing could be further from the truth. A magnetic compass requires no electricity to operate, so it could be the one piece of navigational equipment that still operates on your boat when the proverbial you-know-what hits the fan.

As the boat turns, the compass continues to point at magnetic north, and the course is shown (relative to magnetic north) in reference to a line, which represents the boat's heading. A compass has what is known as the "card," divided into 360 degrees. Thus, if the card reads 90 degrees, you will be steering a course due east; 180, due south; and so on.

This compass at the helm of a sailing boat is well placed for visibility by the helmsman. (Photo: Mark Corke)

For a compass to work well, it has to be correctly installed and properly adjusted. Unfortunately, on a large number of boats, the compass has been installed incorrectly. And with the ever-increasing strain on dashboard real estate, the compass is often pushed out, literally. Electrical interference from chartplotters, radios, speakers, and other electronic aids may affect compasses if they are too close to each other, so an effort should be made to keep these as far away from the main steering compass as possible. A good minimum is 12 inches.

The skipper needs to be able to easily see the main steering compass. This usually means that it must be placed directly in front of the helm position with what is known as the lubber line — two pins or some type of marking — parallel to the centerline of the boat. The skipper merely glances down to see the course being steered.

When North Is Not North

In a perfect world, a compass would always point to true north, but there are factors that make this not so. Two errors have to be accounted for: variation and deviation. Magnetic north is not the same as true north, and this difference is written on the compass rose on the chart of the area you're cruising. This difference, in degrees, between true and magnetic, is known as variation, which must be compensated for when plotting a position.

A nautical chart has two compass roses, one inside the other. The outer one always points to true north, and the inner shows, in degrees and minutes, the variation in the area, either east or west of true north. Variation, which is caused by differences in Earth's structure, differs from area to area and changes by a very small amount each year. This is annotated on the chart inside the inner compass rose. For example, variation changes from about 16 degrees west in Maine to 6 degrees in Florida and 0 degrees in Louisiana.

The other compass error that must be accounted for is deviation. Deviation refers to errors in the compass itself that cannot be adjusted out. Factors that affect deviation include nearby boat electronics, electrical wiring, metal fittings, and radio equipment. Other things, such as the boat's engine, may also affect deviation. Anything magnetic (such as speakers) placed close by will surely increase deviation. To calculate the error in the compass, it must be "swung," whereby the boat is put on several known headings that are checked against the compass reading. This is typically done by lining up a set of transit marks and comparing the boat's course to the indicated reading. Any error is corrected by adjusting the built-in magnets on the compass, which are attached to compensator rods.

To keep track of compass deviation, you'll need a deviation card, which shows the difference in degrees between the compass reading and the actual course shown on the compass. Compasses that are professionally adjusted will be supplied with a card. But if you do the adjustments yourself, you need to make up your own card. Deviation should be no more than a few degrees on each heading, while variation could be quite a bit more, depending on location. Both deviation and variation (each of which may be added or subtracted) must either be accounted for when working out the plot on the chart or when communicating a compass course to steer to the helmsman.

Folks in Florida are at the top of the list with 18 percent of the calls for towing service coming from there. Part of the reason is likely that the weather is conducive to year-round boating, and it's such a great place to boat that lots of inexperienced people are out on the water — learning and having fun.

New folks may not have a good grasp of navigation, and their boat maintenance skills may not be up to par. There are also plenty of shifting shoals to get boaters into trouble.

The number two spot goes to New York and at number three is California, another place with year-round boating.

The rougher waters of the Pacific Ocean might be a factor in mixing up crud in the fuel tank that strangles engines.

North Carolina and New Jersey round out the top five.

It's no surprise to learn that mechanical breakdown is the number-one cause for a tow, and those calls comprise more than half the calls for service.

But if you think it's just engine breakdowns that are the reason, think again.

Steering systems, transmissions, fuel systems, and even lost props are all examples of mechanical breakdown. Grounding is the second most common cause for a tow and is often caused by operator inattention. Having good charts and knowing how to use them can keep you out of trouble.

Dead batteries from running lights, radios, pumps, and stereos (or from keeping batteries past their usable life) are common problems, too. Consider also switching light bulbs to LED. With more electrical demands on modern boats, it's more likely a boat will run down its batteries and not be able to start the engine. Running out of fuel is also a major cause for a tow, often due to faulty or inaccurate fuel gauges. Trying to push the limits of your range is a sure way to find out that it's not quite as far as you thought.

Engine overheats round out the top five reasons for towing service calls. Failed water pump impellers are a prime cause, along with corroded manifolds, clogged intakes, and collapsed hoses.

10 Important Things To Know About Boat Insurance

Interesting article from my friend John at MoBox, what do you think?

You just bought a really sweet boat. A fine piece of watercraft that will allow you to zip about on a body of water with the wind in your hair and the water on your face. You can’t wait to get out there and start using it. To glide over the water on waterskis. To sip a cold beverage while being gently rocked by the waves. To embarrass your kids by wearing a Speedo that’s two sizes two small. To take guests out for pleasure cruises on moonlit evenings.

 But before you can get down to business, there’s one crucial piece of information you need to consider: boat insurance.

Before you unleash the full power of your watercraft, you need to give some time and thought to how you will insure your boat. Yes, I know, this isn’t a particularly exciting subject, but it’s an important one.

Thankfully, we’re here to help. Let us answer some of the crucial questions you have about protecting your precious boat.

In this post, we’re going to answer 9 crucial questions about boat insurance. The answers will allow you to make an informed decision regarding how you insure your boat.

Let’s get started.

QUESTION #1: What Is Boat Insurance?

Let’s construct a hypothetical situation. You’re out on the lake, enjoying a gloriously beautiful day, just happy to be alive and a boat owner. You’ve applied all the necessary sunscreen / tanning oil to your body and are soaking in the rays.

Unfortunately, your day of happiness is abruptly ruined when you strike a boulder that was hidden just under the surface of the water. Your beautiful, gorgeous, well-maintained boat suddenly has a giant gash in the side, hurting both the boat and your heart.

 This is where boat insurance comes onto the scene. If you have boat insurance, you can be confident that your vessel will be repaired to it’s former state of glory and the costs will be covered by the insurance company.

If you don’t have insurance? Let’s just say you’re up a creek without a paddle. Actually, you’re in a sinking boat because there’s a giant hole in it, but you get the point.

Boat insurance protects you in the event of damage to or even the loss of your boat. See! Boat insurance really can be a fun topic. Well, not fun, per se. But more fun than having to pay thousands of dollars to fix your boat.

QUESTION #2: How Exactly Does Boat Insurance Work?

Sometimes, boat insurance can be bundled with your car insurance and your home insurance, sparing you the hassle of trying to find a separate insurer for your boat. Just like any other kind of insurance, when you purchase insurance you have to make decisions about:

- How much deductible you’ll have
- The type of coverage you want
- The amount of coverage you want

So far, so good.

When you go to insurance companies, they will consider the following factors:

- Age of boat 
- Length
- Value
- Speed/horsepower
- Condition (Are US Coast Guard standards are met?)
- Is it a houseboat used as primary residence? (This would be awesome, by the way).
- Type of boat? (Inboard, outboard, utility, cruiser, bass boat, saltwater fishing boat, performance boat)
- How many owners?
- Where will it operate? (ocean, lakes, bays rivers, Great Lakes)

Depending on the answers to these questions, the cost of your policy will be higher or lower. So, for example, if you own a high speed houseboat that doesn’t meet US Coast Guard Standards and is worth $50,000, you’ll probably be shelling out quite a lot of cash to insure your boat.

QUESTION #3: How Does Home Insurance Differ From Boat Insurance?

Believe it or not, some home insurance policies will actually cover your boat if it’s small, but if it’s worth more than $10,000, you’ll probably need to purchase a separate policy.

A boat policy also includes liability coverage if someone is injured aboard your boat. For example, if your friend has had a few too many drinks and is salsa dancing while you’re traveling at 50 mph and accidentally trips and breaks his leg, you’re covered. Do you really have friends who would do that? You may want to reconsider some of your life choices.

 A boat policy also will allow you to suspend coverage when you’re not using your boat. For example, if you don’t plan on doing much boating during the winter, you can put a hold on your coverage.

QUESTION #4: What Is Covered In Your Boat Insurance Policy?

Here are the items traditionally covered in boat policies:

- Collision damage. This includes repair and replacement of boat, but maybe not clean-up wreckage. Just don’t totally sink your boat and this won’t be an issue. If you’re legitimately concerned about this perhaps you shouldn’t be driving a boat in the first place.

- Property damage liability. If you accidentally crash into someone else’s boat or destroy someone’s dock, you’re covered.

- Engine damage. You’ll want to double check on this one because some policies will have machinery damage exclusions.

- Bodily injury liability. If you accidentally hurt someone while operating your boat, you’ll be covered. If this point makes you happy, you may want to be psychiatrically evaluated.

- Weather damage. Some policies will cover weather-related damage to your boat, although you’ll certainly want to check on this one.

- Comprehensive. Coverage can provide payments for medical payments, fishing equipment, oil spills, personal property, roadside assistance, uninsured or underinsured incidents. 

QUESTION #5: Is Your Boat Covered When It’s Out Of Water?

 Why must you ask all these questions? Just kidding. We like helping. If your boat is on a trailer being pulled by your car, it’s covered by your auto policy, although the limits of your policy apply, so familiarize yourself with those.

Your homeowners policy may provide limited coverage if your boat is damaged while on your property, but it might not cover vandalism or if your boat is stolen.

QUESTION #6: Does Your Boat Insurance Policy Cover You Everywhere?

Most policies for smaller boats have a “navigational warranty”, which determines where you boat insurance policy is in effect. For example, your policy may cover you for the inland waters of the US and Canada or the coastal waters of the two countries.

Policies for larger boats typically have different areas covered, like the territories between Eastport, Maine to Cape Hatteras, North Carolina.

There are some places that could be excluded for security reasons, like if you’ll be sailing in an area inhabited by Somali Pirates. Listen, if you’re in an area like that, you’ve got bigger problems than your insurance policy. Like what type of assault weapon you should choose.

QUESTION #7: Are You Required To Have Boat Insurance?

Some states may require you to have liability coverage. Some marinas may require you to have insurance to dock your boat. Finally, the lender may require you to have insurance before giving you a loan.

But seriously, why would you not have boat insurance? Unless you’re an independently wealthy billionaire who is able to purchase boats without a second thought, you probably should have some form of insurance.

QUESTION #8: What’s The Difference Between Agreed Value and Market Value Policies?

It works like this. The moment you purchase your boat, it starts depreciating in value. Isn’t that a wonderful thing?

An agreed value policy covers the value of the boat when the policy is written. A market value policy covers the actual market value of the boat when any damage occurs. Agreed value policies usually cost more upfront but you don’t need to worry about depreciation.

No matter what policy you start with, your insurer will probably eventually insist you switch to a market value policy, which will save you money anyways.

QUESTION #9: What Does Boat Insurance Typically Cost?

As you would expect, the cost of your policy will depend on a large number of variables, including:

- The state where you reside
- The type of boat
- The age of boat
- The size of the motor
- How you use the boat
- Where you use the boat
- And a variety of other factors

QUESTION #10: How Can You Save Money On Your Policy?

First, buy a policy that is very specific to your boat. Don’t purchase a policy that offers coverage you don’t need. To put it bluntly (because we know you can handle it), that’s stupid.

Second, ask your underwriter if they offer any discounts for safety features. For example, a wireless auto tether that kills the engine if you or one of your passengers falls overboard. If they do offer safety discounts, consider investing in those safety measures. Also, consider doing the safety dance, just for fun.

 Third, see if there are any discounts available for taking safety classes. You may be able to reduce your premium simply by attending one of these classes.

Fourth, take advantage of any times when you won’t be using your boat to suspend your coverage. Don’t pay for those months your boat is sitting idle (see above note re: stupid).

Finally, you may be able to get a discount if you’re boating in fresh water rather than salt water.

Conclusion

Boat insurance is like a prostate exam: you hope you never need it but it’s pretty important. So while it’s certainly not fun to research which policy you should use, you can make the process as painless as possible by knowing what you need, how you’ll be using your boat, and ways you can cut the costs.

Now then, happy sailing!

This article originally appeared on moboxmarine.com blog "10 important things about boat insurance" and is used with permission". 

IT'S A GOOD TIME TO CHECK THE OLD TOOL BAG AND MAKE SURE WE ARE READY FOR THE NEW YEAR

Here's an article on the best tools to keep with you.

Ten Top Boat Tools

By Tom Neale for BoatUS

You may have lots of tools in your bag, but are they all necessary? Here's my selection of those I just can't leave the dock without.

  It seems that you can never have too many tools. I have hundreds that I've collected over the years, but there are some seemingly simple tools that have gotten me out of a jam more times than I care to remember. If I had to whittle the list down to just 10 that I couldn't do without, these would be on it.

The majority of these tools can be bought from online retailers for just a few dollars. Buy good quality tools because they last longer and will be cheaper in the long run.

1. Magnetizer/Demagnetizer: This enables you to quickly magnetize your screwdriver so that it'll hold ferrous screws. It also enables you to demagnetize it.
2. Locking Forceps: The perfect tool for reaching into tight places to retrieve or insert small nuts, bolts, circlips, and O-rings. Also good for clamping small hoses.
3. Block Of Wood: Use as backup for hammering, screwing, drilling, cutting and gluing, and as a cushion for tapping jobs.
4. Old Inner Tube: Cut one to make temporary gaskets and insulation. Also useful to give hands extra grip for torque. You can probably get one of these for free from a tire shop.
5. Good Mechanics Gloves: Protect your hands, but also increase grip when you need to undo things like spin-on filters. Try them for size before you buy, as they should fit, well, like a glove.
6. Plastic-coated Wire Coat Hanger: Bends to innumerable shapes and are perfect for clearing drains and hooking dropped objects. You can most likely find one for free, on the floor of your closet, behind all the clothes.
7. Oscillating Tool: Mine is a Rockwell, but there are other makes. Will cut directly into surfaces, including fiberglass. With the right adaptor can also be used as a detail sander, reefing tool for teak decks, or power scraper.
8. Quality LED Headlamp: I like the swiveling type so that you can adjust it to suit your work. Far safer, and way more comfortable, than holding a flashlight in your teeth.
9. Mechanic's Stethoscope: Invaluable for diagnosis, use one to familiarize yourself with component sounds now, so that you'll recognize abnormalities later.
10. Stainless Wire Brushes: For cleaning threads and terminals, removing rust, surface prep, and much more.